Tempe, Arizona. Serving Tempe, from downtown, Mill Avenue and Arizona State University to south Tempe and neighboring Guadalupe. Phoenix showroom: 1035 E. Camelback Road · 800-727-1954

Latexpedic natural latex mattress with a cotton and wool quilted cover, sold factory direct to Tempe, Arizona

Tempe Natural Latex Mattress 7, 10 & 12 INCH

Handmade one at a time and sold factory direct: the Latexpedic mattress in three heights and four firmnesses, fully reversible, with a 20-year limited warranty.

Call 800-727-1954

Phoenix Showroom

1035 E. Camelback Road, Phoenix, AZ 85014

Factory direct prices: 800-727-1954

From Tempe: About 12 miles via Loop 202 and I-10
Hours: Mon to Sat 10 to 5, Sun 12 to 4

Burbank Showroom

907 N. Hollywood Way, Burbank, CA 91505

Factory direct prices: 800-727-1954

Hours: Please call ahead to confirm

A Natural, Reversible Latex Mattress for Tempe Homes

Every Latexpedic mattress is planned as a complete sleep system, with responsive latex, cotton-and-wool quilting on both sides, practical handles, zipper access, four firmness choices and a 20-year limited warranty.

Factory Direct from the Family That Makes It

From Mill Avenue and Tempe Town Lake to the campus of Arizona State University and the quiet neighborhoods of south Tempe, this is a city of students, professors and families alike. Whether you are furnishing a first apartment or a forever home, a well-made mattress pays off night after night. Every Latexpedic mattress is built by hand, one at a time, from natural latex, cotton and wool. Our Phoenix showroom is about 20 minutes away, and because we sell factory direct, there is no retail markup.

Factory direct prices: 800-727-1954

The collection

Three heights, every one reversible, each made in Soft through Ultra Firm.

7 inch

The 7 Inch Latexpedic Mattress

Our streamlined, low-profile latex mattress for an easier entry height. It suits adjustable beds, platform beds and high-low care beds where total bed height matters, and keeps the reversible design, handles and zipper.

Soft
Regular Firm
Extra Firm
Ultra Firm

Factory direct prices: 800-727-1954

10 inch

The 10 Inch Latexpedic Mattress

A traditional mattress height with more room for layered latex, balancing surface cushioning with deeper support. A versatile choice for master bedrooms and adjustable beds.

Soft
Regular Firm
Extra Firm
Ultra Firm

Factory direct prices: 800-727-1954

12 inch

The 12 Inch Ultimate Mattress

Our most luxurious and substantial model. The added height allows a refined combination of cushioning, transition and support, with the broadest range of firmness configurations.

Soft
Regular Firm
Extra Firm
Ultra Firm

Factory direct prices: 800-727-1954

Four firmnesses

Firmness comes from how the latex is chosen and layered, not from a thin decorative topper.

Diagram of natural spinal curvature that the right Latexpedic firmness is chosen to support — The right firmness supports the spine's natural curves.

Soft

Gentle give at the surface that cushions shoulders and hips. Often chosen by side sleepers and lighter sleepers.

Regular Firm

A balanced feel that pairs surface comfort with steady support, suited to many back and combination sleepers.

Extra Firm

A flatter, more stable surface for sleepers who want less sink and more push-back, including many stomach sleepers.

Ultra Firm

Our firmest orthopedic feel, with minimal give, for those who prefer a very solid sleep surface.

Factory direct prices: 800-727-1954

All twelve combinations, each reversible and quilted on both sides
Model	Soft	Regular Firm	Extra Firm	Ultra Firm
7 inch	Available	Available	Available	Available
10 inch	Available	Available	Available	Available
12 inch Ultimate	Available	Available	Available	Available

Construction

The two-sided details that make a mattress truly reversible and serviceable.

Latexpedic natural latex mattress by Electropedic showing the two-sided quilted cover, handles and zipper — Quilted on both sides, with handles and zipper access.

Fully Reversible

Both surfaces receive finished quilting, comfort materials and careful tailoring, so the mattress can be slept on from either side. Reversing it from time to time spreads normal wear across the whole mattress.

Quilted with Cotton and Wool on Both Sides

Breathable cotton creates a familiar, inviting surface, and wool adds loft while helping regulate temperature. That matters in Tempe, where summer heat radiates off the city long after dark and nights rarely bring much relief.

Sturdy Side Handles

Latex is dense and durable, so anchored handles make positioning, rotating and reversing the mattress more manageable. Use them to guide the mattress rather than carry its full weight.

Zipper Access to the Latex Layers

A zippered cover opens for inspection or a comfort adjustment, which is especially useful if you later want to fine-tune your firmness.

Factory direct prices: 800-727-1954

Handmade, one at a time

Each mattress is layered, fitted and finished by hand to its own work order.

Handmade Latexpedic latex mattress after final hand inspection of borders, corners and seams — Every border, corner and seam is checked by hand.

Natural latex being tapped from a rubber tree, the raw material inside every Latexpedic mattress — Natural latex begins as the sap of the rubber tree.

Built to Your Work Order

Each Latexpedic mattress is planned around its height, firmness, size and the bed it will sit on. The latex layers are cut, centered and aligned by hand, then the quilted panel is closed and the perimeter is checked until the shape is square and even.

Inspected Before It Leaves

Borders, corners, seams, handles and zipper are all checked by hand. The finished mattress is tested flat and, when appropriate, on an adjustable base to confirm it matches the requested firmness.

Made for Adjustable Beds

Latex bends readily when the head or foot of an adjustable bed rises and returns to shape when it lowers. The 7 inch model is especially helpful when a lower overall bed height is wanted.

Factory direct prices: 800-727-1954

20-year limited warranty

Confidence in our materials and workmanship, in writing.

Latexpedic latex mattress on an electric adjustable bed with the head section raised — Latex bends with the bed and returns to shape.

Protect Your Mattress for Twenty Years

Every Latexpedic mattress includes a 20-year limited warranty. Support the mattress on a suitable foundation or adjustable base, protect it from moisture, and keep your sales documents. Normal softening and changes in comfort preference are different from a manufacturing defect, so please review the written warranty at purchase.

Factory direct prices: 800-727-1954

Questions from Tempe

Quick answers before you visit.

What heights does the Latexpedic mattress come in?

The Latexpedic mattress is made in three heights: the 7 inch, the 10 inch and the 12 inch Ultimate. Every height is fully reversible and quilted on both sides.

Which firmness levels are available?

Each of the three models is available in four firmnesses: Soft, Regular Firm, Extra Firm and Ultra Firm, for twelve combinations in all.

Can I flip a Latexpedic mattress?

Yes. Every Latexpedic mattress is fully reversible and quilted with cotton and wool on both sides, so either side can be slept on. Handles help with turning and a zipper gives access to the latex layers inside.

What warranty comes with a Latexpedic mattress?

Latexpedic mattresses include a 20-year limited warranty. Review the written warranty at purchase for full coverage terms and care requirements.

Where can Tempe residents try a Latexpedic mattress?

The closest showroom to Tempe is at 1035 E. Camelback Road in Phoenix, Arizona, about 12 miles northwest by way of Loop 202 and Interstate 10. Call 800-727-1954 before visiting.

Three generations, one family, and mattresses built one at a time since 1964.

Compare 7 inch, 10 inch, and 12 inch Ultimate Latexpedic mattresses in Soft through Ultra Firm comfort choices. Factory direct prices: 800-727-1954.

Directions from Tempe to our Phoenix showroom

1035 E. Camelback Road, Phoenix, AZ 85014, about 12 miles and roughly 20 minutes in light traffic.

Get on Loop 202 west

From downtown Tempe, take Scottsdale Road or Priest Drive to Loop 202, the Red Mountain Freeway, and head west toward Phoenix.

Continue onto I-10 west

Follow Loop 202 west past Sky Harbor Airport, where it joins I-10 heading toward downtown Phoenix.

Exit at 7th Street

Take the 7th Street exit and head north on 7th Street for about four miles.

Turn right on Camelback Road

Turn right onto Camelback Road and continue a few blocks east to the showroom at 1035 E. Camelback Road.

Get directions from my location

Showroom hours are Monday through Saturday from 10 to 5 and Sunday from 12 to 4. Traffic on Loop 202 and I-10 builds at rush hour, so check the live map before you leave. Call 800-727-1954 before you visit and we will have the right mattress ready to try.